Digital Pylons

Advertising structures with 4 m² LED canvas under protective tempered glass.

Ready-made solutions for displaying advertising and broadcasting any video content on the street and indoors.

Pylons
Design Options

The structures can be one-sided and two-sided. Three profile design-models are available.

Design Options
Demonstration section
LED Display
Digital Displays

They differ in the type of LED modules and pixel pitch. There are two types of modules available — SMD and DIP.

Module type

SMD modules are compact, LEDs are assembled in one cell. The picture looks good even at close range.

DIP modules allow for greater image contrast during the day due to their brightness.

Pixel Pitch

It’s the density of pixels relative to each other. The smaller the step, the sharper the image.

Components
Display Components

The display consists of the LED modules, power supplies and receiving cards. Control unit, multicard and utility power elements are inside the constriction as well.

All internal electronic components are grounded

Operation in the temperature range from ‒40 to 50 °С

Electrical wiring is made according to electrical installation rule

In the production of LED displays, our company DiMedia uses high quality components:
  • NationStar LEDs with gold conductor
  • Macroblock MBI5124 power drivers with 1920 Hz update rate
  • Includes NovaStar remote control screen system
  • Delta CE power supply units DPS-300AB-76 B CE with spare capacity of 25% and ventilation sensor
Connection
Remote Connection

Digital displays can be set up and managed remotely from anywhere in the world via the Internet. Connection to the global network is made through network cards, Wi-Fi and GSM (3G, 4G) modules.

Use
Ease of Use

We pay special attention to safe operation in various weather conditions. 260 newton gas springs prevent the doors from closing while meeting the wind gusts.

pylon-hotspots
1
2
3
Glass edge protection

The aluminum frame profile side and the rubber seal protect the glass edge from damage.

Ventilation
Ventilation

The construction provides ventilation holes which ensure natural air circulation to maintain the required temperature and humidity level inside the construction.

Equipment
Extra Equipment

The operational capabilities of digital displays can be extended by connecting extra equipment.

Auto dimming by light sensor

Depending on the illumination, automatically adjusts the LED brightness level.

Equipment for communication via Wi-Fi and mobile networks

Allows you to configure a wireless connection to your screen management system, including 3G and 4G (LTE) networks.

Sound system

Adds the ability to output sound to the content being broadcast on the digital display.

LED display internal volume heating system

Required to use the LED display in particularly cold climates.

Ambient temperature sensor

Allows you to display information about the current outdoor temperature.

Electricity metering unit

May be with manual readout or with automatic sending to the power supply company.

Video surveillance system

Allows you to monitor the screen remotely and control the content of the broadcast.

Color
Any color from the RAL Classic catalogue

The polymer powder painting method is used. End and front elements can be painted in different colors according to the customer’s request.

Impressions
Here you find our references
Workflow
Production steps
1

Request

You have questions about our products and services? Just contact us and we will be at your side.

2

Planning

We create a concept and plan an implementation according to your wishes and advise you in all matters.

3

Production & Transport

As soon as the planning is completed and approved by you, we go into production and deliver the product to your desired address.

4

Installing

Our qualified personal will take care of the assembly and installation of your product on site.

5

Service

For service questions, you have a personal contact person.

Kontakt
[jet_engine component="option" page="kontaktdaten" field="name"]
[jet_engine component="option" page="kontaktdaten" field="ansprechpartner-1"]
[jet_engine component="option" page="kontaktdaten" field="strasse-und-hausnummer"]
[jet_engine component="option" page="kontaktdaten" field="postleitzahl"] [jet_engine component="option" page="kontaktdaten" field="ort"]
Tel: [jet_engine component="option" page="kontaktdaten" field="telefonnummer"]
Fax: [jet_engine component="option" page="kontaktdaten" field="fax"]
Mail: [jet_engine component="option" page="kontaktdaten" field="e-mail"]
Web: [jet_engine component="option" page="kontaktdaten" field="website"]
TRYO GmbH
Oliver Krimm
Levinestraße 2
03044 Cottbus
Tel: +49 (0) 355 – 29052019
Fax: +49 (0) 355 – 29052018
Contact
TRYO GmbH
Oliver Krimm
Levinestraße 2
Germany, 03044 Cottbus
Phone: +49 (0) 355 – 29052019
Fax: +49 (0) 355 – 29052018