Three-sided Digital Pylons

Three-edged advertising structures with built-in LED panels

They are a ready-made solution for displaying advertising and broadcasting any video content. Well combined with urban architecture.

Digital Pylons
Design Options

Three profile design-models are available. From 3 to 15 advertising posters can be placed in Three-sided pylon, depending on the modification.

Design options
ABS cladding
Demonstration section
Structural Features

Tryo Three-sided Digital Pylon ist zuverlässig und wartungsfreundlich, verbindet die Wünsche unserer Kunden mit modernen technischen Lösungen.

LED Display
Digital Displays

They differ in the type of LED modules and pixel pitch. There are two types of modules available — SMD and DIP.

Module type

SMD modules are compact, LEDs are assembled in one cell. The picture looks good even at close range.

DIP modules allow for greater image contrast during the day due to their brightness.

Pixel Pitch

It’s the density of pixels relative to each other. The smaller the step, the sharper the image.

Display Components

The display consists of the LED modules, power supplies and receiving cards. Control unit, multicard and utility power elements are inside the constriction as well.

All internal electronic components are grounded

Operation in the temperature range from ‒40 to 50 °С

Electrical wiring is made according to electrical installation rule

In the production of LED displays, our company DiMedia uses high quality components:
  • NationStar LEDs with gold conductor
  • Macroblock MBI5124 power drivers with 1920 Hz update rate
  • Includes NovaStar remote control screen system
  • Delta CE power supply units DPS-300AB-76 B CE with spare capacity of 25% and ventilation sensor
Remote Connection

Digital displays can be set up and managed remotely from anywhere in the world via the Internet. Connection to the global network is made through network cards, Wi-Fi and GSM (3G, 4G) modules.

Multi-Component Profile System

Unique development of four profiles with protection against dust and moisture according to IP54 standard. Hardened aluminum alloy 6063 (AD31) with high corrosion resistance.


The stable steel frame provides high stiffness and meets high wind loads. The frame is collapsible and consists of separate elements that allows to reduce expenses at purchase of the self-assembly kit.

2-1920 1-1920
Ease of Use

We pay special attention to safe operation in various weather conditions. 260 newton gas springs prevent the doors from closing while meeting the wind gusts.

Glass edge protection

The aluminum frame profile side and the rubber seal protect the glass edge from damage.

Extra Equipment

The operational capabilities of digital displays can be extended by connecting extra equipment.

Auto dimming by light sensor

Depending on the illumination, automatically adjusts the LED brightness level.

Equipment for communication via Wi-Fi and mobile networks

Allows you to configure a wireless connection to your screen management system, including 3G and 4G (LTE) networks.

Sound system

Adds the ability to output sound to the content being broadcast on the digital display.

LED display internal volume heating system

Required to use the LED display in particularly cold climates.

Ambient temperature sensor

Allows you to display information about the current outdoor temperature.

Electricity metering unit

May be with manual readout or with automatic sending to the power supply company.

Video surveillance system

Allows you to monitor the screen remotely and control the content of the broadcast.

Any color from the RAL Classic catalogue

The polymer powder painting method is used. End and front elements can be painted in different colors according to the customer’s request.

Here you find our references
Production steps


You have questions about our products and services? Just contact us and we will be at your side.



We create a concept and plan an implementation according to your wishes and advise you in all matters.


Production & Transport

As soon as the planning is completed and approved by you, we go into production and deliver the product to your desired address.



Our qualified personal will take care of the assembly and installation of your product on site.



For service questions, you have a personal contact person.

Oliver Krimm
Levinestraße 2
03044 Cottbus
Tel: +49 (0) 355 – 29052019
Fax: +49 (0) 355 – 29052018
Oliver Krimm
Levinestraße 2
03044 Cottbus
Tel: +49 (0) 355 – 29052019
Fax: +49 (0) 355 – 29052018
Oliver Krimm
Levinestraße 2
Germany, 03044 Cottbus
Phone: +49 (0) 355 – 29052019
Fax: +49 (0) 355 – 29052018